Eureka Fastener Finder
Find the ideal fastener or fixer for your application!
A rivet is a fastener, consisting of a body and a mandrel, used to attach thin pieces of material to thin pieces of metal.
A rivet works by drilling a same-sized hole through both materials which coincides with the thickness of the rivet.
The mandrel part of the rivet is then placed into the nose-piece of a rivet gun, where after the body part is placed through the holes in the work-piece.
The handles of the rivet gun is then squeezed multiple times until the mandrel breaks off, leaving the body part securing the work-piece together.
3.2mm | 4mm | 4.8mm | |
6mm | 1.5 - 3.5mm | 1 - 3mm | 1.5-2.5mm |
8mm | 3.5 - 5mm | 3 - 5mm | 2.5 - 4mm |
10mm | 5 - 7mm | 5 - 6.5mm | 4 - 5.5mm |
12mm | 7 - 9mm | 6 - 8mm | 6 - 8mm |
15mm | 9 - 11mm | 8 - 10mm | 8 - 10mm |
18mm | 13 - 15mm | 12 - 14mm | 10 - 13mm |
21mm | 13 - 18mm | 12 - 17mm | 12 - 16mm |
Aluminium Open |
Aluminium Countersunk |
Aluminium Closed |
Large Flange |
Aluminium Peeled |
Stainless steel Open |
3.2x 6mm | 4.0x10mm | 4.0x12mm | 4.0x10mm | 4.0x12mm | 4.0x15mm |
3.2x 8mm | 4.0x12mm | 4.0x15mm | 4.0x12mm | 4.0x15mm | 4.8x10mm |
3.2x10mm | 4.0x15mm | 4.8x12mm | 4.0x15mm | 4.8x12mm | 4.8x18mm |
3.2x12mm | 4.8x12mm | 4.8x15mm | 4.8x10mm | 4.8x15mm | |
3.2x15mm | 4.8x18mm | 4.8x18mm | 4.8x12mm | 4.8x18mm | |
3.2x18mm | 4.8x21mm | 4.8x15mm | |||
3.2x21mm | 4.8x18mm | ||||
4.0x6mm | 4.8x21mm | ||||
4.0x8mm | 4.8x8mm | ||||
4.0x10mm | |||||
4.0x12mm | |||||
4.0x15mm | |||||
4.0x18mm | |||||
4.0x21mm | |||||
4.8x6mm | |||||
4.8x8mm | |||||
4.8x10mm | |||||
4.8x12mm | |||||
4.8x15mm | |||||
4.8x18mm | |||||
4.8x21mm |
Drill a hole through both work pieces, same width as body
• A Stubby drill bit is ideal on sheet metal.
• Double sided for longer life.